Explore our specification-grade double and triple glazed aluminum window series. Custom-built to submittal drawings with 6063-T6 extruded alloy and PA66 thermal barriers.
Kazakhstan represents one of the most demanding geographic and climatic operational environments for architectural glazing in Eurasia. Spanning from the windswept Northern steppes of Astana (Nur-Sultan)—where winter temperatures regularly plummet to -40°C to -45°C—to the intensely sunny, high-UV southern metropolis of Almaty and the desert heat of Shymkent, windows must withstand an absolute annual temperature differential exceeding 75°C to 80°C.
As an established B2B manufacturer and direct exporter with over six decades of custom aluminum fabrication expertise, we deliver precision-engineered double glazing and triple glazing aluminum window systems designed specifically to meet and exceed GOST 23166-99 and SNiP RK 2.04-03-2002 thermal performance standards enforced across Kazakhstan’s construction sector.
Unlike standard unreinforced vinyl (PVC) or basic non-thermal aluminum frames, our 6063-T6 alloy double and triple glazed units combine structural permanence with superior U-values.
Standard aluminum profiles conduct cold rapidly, causing interior frame frosting. We integrate 24mm to 34mm PA66 GF25 (25% glass fiber reinforced polyamide) thermal break strips within our extruded frames, effectively isolating interior metal from exterior -40°C temperatures and eliminating internal condensation.
For Kazakhstan’s northern regions, double glazing is often insufficient for modern energy codes. Our triple-pane units feature double silver Low-E soft coatings, 90%+ pure argon gas fill, and Swiss warm-edge composite spacers, achieving overall window U-values as low as 0.78 W/m²K (R-value ~7.2).
Mechanically crimped or screwed window corners degrade under severe wind vibration and thermal expansion cycles. Every single frame sash and joint in our shop is sigma welded and dressed flush, turning the corner into one solid piece of 6063-T6 metal that will never sag, leak, or rack out of square.
High-rise construction in Astana and earthquake-prone mountain developments in Almaty require rigid structural compliance. Our heavy-wall 1.8mm to 2.2mm profile systems carry certified wind resistance up to 3,500 Pa (Class 5 wind load) and integrated EPDM gasket seals engineered for extreme structural deflection without seal rupture.
Tailored architectural glazing solutions configured for specific regional microclimates and building typologies in the Republic of Kazakhstan.
Insights for real estate developers, general contractors, and fenestration importers operating within the Republic of Kazakhstan.
Historically, PVC profile windows dominated Kazakhstan’s mid-tier market. However, due to severe thermal expansion cycles in Kazakhstan where vinyl frames yellow, warp, and break seal tightness within 5-7 years, major developers in Astana and Almaty (such as BI Group and Bazis-A sub-contractors) are standardizing on thermally broken aluminum extrusion systems for long-term structural durability.
The Kazakh market strongly favors European-style Tilt and Turn (Поворотное-откидное) window mechanisms over standard American sliding or out-swing casement designs. Tilt ventilation allows secure, draft-free micro-ventilation during sub-zero winter months without dumping massive cold air volumes into conditioned rooms.
State building inspection authorities in Kazakhstan have tightened thermal audit requirements for new residential handovers. Windows failing to meet required thermal coefficient values (R-value ≥ 0.70 m²·°C/W for Northern regions) face rejection during state commission acceptance. Supplying certified triple-glazed units ensures immediate regulatory compliance.
Evaluate how our Heavy-Duty Thermal Break 6063-T6 Aluminum Systems compare against alternative framing materials in Kazakhstan’s operating conditions.
| Performance Metrics | Standard PVC (Plastic) Profile | Basic Non-Thermal Aluminum | Our Heavy-Duty Thermal Break 6063-T6 |
|---|---|---|---|
| Thermal U-Value (W/m²K) | 1.4 - 1.8 W/m²K | 2.8 - 5.0 W/m²K (Cold frame) | 0.78 - 1.2 W/m²K (Ultra Insulated) |
| Extreme Sub-Zero Performance (-40°C) | Becomes brittle, yellowing, joint crack risk | Excessive condensation & frost buildup | Zero structural change, warm inner metal |
| Corner Joint Construction | Plastic heat-welded corners (Weak under load) | Screwed metal brackets (Loosens over time) | Sigma-Welded & Dressed 6063-T6 Alloy Joints |
| Wind Pressure Load Rating | 1,200 - 1,800 Pa (Flexes under steppe winds) | 2,000 Pa | 3,500 Pa (Ideal for high-rise facades) |
| Glazing Package Flexibility | Max 24mm - 32mm Double Glass | Single or thin Double Glass | Up to 52mm Triple Low-E Argon Glazing |
| Expected Service Life | 10 - 15 Years | 20 Years (Cold interior) | 50+ Years (Zero Rot, Swell, or Rust) |
When sourcing custom architectural windows internationally for project sites in Almaty, Astana, or Shymkent, dimensional precision and logistics reliability are non-negotiable. We do not mass-produce cheap off-the-shelf stock units. Every single window package leaving our shop floor is custom-fabricated from your exact CAD submittal drawings.
Our shop engineers generate comprehensive shop drawings verifying profile depth, glass bite, opening sashes, hardware positioning, and weep hole detailing prior to cutting metal.
IGU glass units are double-sealed with dual-component structural silicone, preventing gas leakages even when transported through high-altitude Eurasian mountain passes.
Windows are individually labelled by elevation tag, edge-protected with high-density foam, and secured inside reinforced wooden crates optimized for multi-modal rail and truck transit to Kazakhstan.
We provide comprehensive international B2B export support for Kazakh construction firms, importers, and architects. From customs documentation assistance to direct containerized shipping.
Technical and commercial clarity for developers, architects, and importers purchasing double and triple glazed aluminum systems.
While PVC windows have lower initial upfront costs, Kazakhstan’s 80°C annual temperature variance causes PVC to expand and contract rapidly, leading to corner joint cracking, frame yellowing, and seal failure within a few seasons. Solid 6063-T6 aluminum frames with PA66 thermal breaks maintain exact structural dimensions, hold vastly larger glass panes with narrower sightlines, and carry a service lifespan exceeding 50 years without repainting or structural degradation.
For Astana, Karaganda, and Northern regions, we strongly recommend our Triple Glazed Insulated Glass Units (IGU) consisting of 6mm Toughened Glass + 14mm Argon Gap (Warm Edge Spacer) + 4mm Clear Float + 14mm Argon Gap + 6mm Low-E Coated Glass (Overall 44mm to 48mm glass thickness). This setup yields a U-value below 0.8 W/m²K, eliminating inner glass surface cold radiation and frame sweating.
Mechanically crimped aluminum corners rely on internal steel cleats and sealant glue. Under severe thermal shock (dropping from +20°C indoors to -40°C outdoors), crimped joints can open microscopic gaps that let in water and cold air. Our sigma welding process melts the extruded 6063-T6 alloy members together into a seamless metal bond. The corner behaves as one continuous structural profile that cannot open, rack, or leak.
Yes. Our thermal break double and triple glazed window series are manufactured under ISO9001 quality management and comply with international thermal standards equivalent to GOST 23166-99 and SNiP RK 2.04-03-2002. We provide full factory test reports for U-values, wind pressure resistance, air permeability, and water tightness to assist with local state commission approvals.
Custom fabrication is our core standard. We do not enforce fixed size grids. Send your architectural elevations, rough opening schedules, or CAD drawings, and our engineering team will produce detailed shop drawings for your review before metal extrusion or glass cutting begins.
Every unit is wrapped in protective film, fitted with heavy-duty corner guards, and packed inside fully enclosed fumigated plywood crates with internal foam cushioning. Crates are engineered for forklift handling and overland Eurasian containerized rail/truck transit to major logistics hubs in Almaty, Astana, and Shymkent.
Contact our technical sales team to submit your architectural drawings, request custom U-value calculations, or obtain factory-direct B2B pricing for your commercial or residential project in Kazakhstan.
Send an Inquiry